3-24
Basic Operation
13
Press [Yes] (the
Left Select
key). This makes a
connection with the entered destination.
If the connection is successful,
Connected.
is displayed
on the screen. Press [OK] (the
Right Select
key).
Completed.
is displayed and the screen returns to the
basic screen.
If the connection failed,
Cannot connect.
is displayed.
Press [OK] (the
Right Select
key). The screen shown in
step 3 reappears. Check and re-enter the destination.
14
Press the
Confirm Destination
key to confirm the
registered destinations.
Press [Exit] (the
Right Select
key) to return to the basic
screen.
15
Press the
Start
key. Transmission starts.
NOTE:
If the screen for confirming the destination before
transmission (
page 8-107
) is set to [On], the Confirm
Destination screen appears when the
Start
key is pressed.
To Next Page
Loading...
