8-94
Default Setting (System Menu)
2
Press the
OK
key. The Printer menu appears.
3
Press the
or
key to select [CR Action].
4
Press the
OK
key.
5
Press the
or
key to select [CR Only], [LF and CR]
or [Ignore CR].
6
Press the
OK
key.
Completed.
is displayed and the
screen returns to the Printer menu.
Job Name
Set whether the job name set in the printer driver is displayed.
Use the procedure below to specify a Job Name.
1
In the Sys. Menu/Count. menu, press the
or
key to
select [Printer].
2
Press the
OK
key. The Printer menu appears.
3
Press the
or
key to select [Job Name].
4
Press the
OK
key. Job Name appears.
5
Press the
or
key to select [Off] or [On].
To Next Page
Loading...
