5
5-15
Sending Functions
File Name Entry
This setting allows you to assign a document name to scanned images. You can specify a default for the document
name.
Use the procedure below to assign names to scanned documents that you are sending.
1
Press the
Send
key.
2
Place the original.
3
Press the
Function Menu
key. Function Menu appears.
4
Press the
or
key to select [File Name Entry].
5
Press the
OK
key. File Name Entry appears.
NOTE:
Refer to
Character Entry Method on Appendix-5
for
details on entering characters.
6
Enter the file name, press the
OK
key. Additional Info.
appears.
NOTE:
Refer to
Character Entry Method on Appendix-5
for
details on entering characters.
7
Enter the date and time, job number, etc. on the screen,
and then press the
OK
key.
NOTE:
Refer to
Character Entry Method on Appendix-5
for
details on entering characters.
Completed.
is displayed and the screen returns to the
basic screen for sending.
8
Specify the destination, and press the
Start
key to start
sending.
NOTE:
Press the
Reset
key to reset the settings selected in
Function Menu.
To Next Page
Loading...
