Kyocera ECOSYS M2030dn

8
8-95
Default Setting (System Menu)
6 Press the OK key.
When [On] is selected, a screen appears for you to set
the job name to be used.
When [Off] is selected,
Completed. is displayed and the
screen returns to the Printer screen.
7 Press the  or  key to select [Job Name], [Job
No.+Job Name] or [Job Name+Job No.].
8 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
User Name
Set whether the user name set in the printer driver is displayed.
Use the procedure below to specify the User Name setting.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the  or  key to select [User Name].
4 Press the OK key. User Name appears.
5 Press the  or  key to select [Off] or [On].
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Additional Info.: a b
*********************
2 Job No.+Job Name
3 Job Name+Job No.
1 *Job Name
Sys. Menu/Count.: a b
5 Common Settings
6 Copy
*********************
[ Exit ]
7 Printer
Printer: a b
*********************
2 EcoPrint
3 Override A4/LTR
[ Exit ]
1 Emulation Set.
User Name: a b
1 Off
*********************
2 *On