8-74
Default Setting (System Menu)
RAM Disk Mode
A RAM disk can be created and its size can be set. Creating a RAM disk makes it possible to print from a Job Box.
The procedure for setting the RAM Disk Mode is explained below.
1
In the Sys. Menu/Count. menu, press the
or
key to
select [Common Settings].
2
Press the
OK
key. The Common Settings menu
appears.
3
Press the
or
key to select [RAM Disk Mode].
4
Press the
OK
key. RAM Disk Mode appears.
5
Press the
or
key to select [Off] or [On].
6
If [On] is selected and the
OK
key is pressed, the RAM
disk size screen appears.
If [Off] is selected and the
OK
key is pressed, proceed to
step 8.
7
Press the
or
key or the numeric keys to enter the
size of the RAM disk.
8
A confirmation screen appears. Press [Yes] (the
Left
Select
key). The machine is restarted.
To Next Page
Loading...
