8-98
Default Setting (System Menu)
Auto Cass.Change
Select the action that takes place when the cassette runs out of paper during printing. Selections are as follows. The
default setting is [On].
Use the procedure below to set the Auto Cass.Change.
1
In the Sys. Menu/Count. menu, press the
or
key to
select [Printer].
2
Press the
OK
key. The Printer menu appears.
3
Press the
or
key to select [Auto Cass.Change].
4
Press the
OK
key. Auto Cass.Change appears.
5
Press the
or
key to select [Off] or [On].
6
Press the
OK
key.
Completed.
is displayed and the
screen returns to the Printer menu.
Item Description
Off The printer displays
Load Cassette #
(# is a
cassette number) or
Load MP Tray
, and
stops printing.
Load the paper according to the paper
source displayed to resume printing.
To print from the other paper cassette,
press
or
to display
Use alternative?
,
press
or
to select the desired paper
source, and then press [OK].
On If there is another cassette with the same
size and type of paper, printing will
automatically continue.
To Next Page
Loading...
