Kyocera ECOSYS M2030dn

11
11-9
Management
Changing User Properties
User information can be changed. It can be changed only by a user with administrator privileges.
Use the procedure below to change the user properties.
NOTE: Refer to Character Entry Method on Appendix-5 for details on entering characters.
1 Press the System Menu/Counter key on the main unit
operation panel.
2 Press the  or  key to select [User/Job Account].
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the
Right Select key).
3 The User/Job Account menu appears.
4 Press the  or  key to select [User Login Set.].
5 Press the OK key. The User Login Set. menu appears.
6 Press the  or  key to select [Local User List].
Sys. Menu/Count.: a b
*********************
5 User Property
6 Common Settings
[ Exit ]
4 User/Job Account
Login User Name: L b
*******************
Login Password:
[ Login ]
User/Job Account: a b
*********************
2 Job Account. Set.
3 Unknown ID Job
[ Exit ]
1 User Login Set.
User Login Set.: a b
1 User Login
*********************
3 Group Auth.
[ Exit ]
2 Local User List