5-16
Sending Functions
Subject and Body Entry
When sending E-mail, enter the subject and body of the E-mail.
Use the procedure below to enter the subject and body for an E-mail message and then send the E-mail.
NOTE:
Refer to
Character Entry Method on Appendix-5
for details on entering characters.
1
Press the
Send
key.
2
Place the original.
3
Press the
Function Menu
key. Function Menu appears.
4
Press the
or
key to select [Subject/Body].
5
Press the
OK
key. Subject Entry appears.
6
Enter the subject and press the
OK
key.
NOTE:
Up to 60 characters can be entered for the subject.
7
Enter the body and press the
OK
key.
NOTE:
Up to 500 characters can be entered for the body.
Completed.
is displayed and the screen returns to the
basic screen for sending.
8
Specify the destination, and press the
Start
key to start
sending.
NOTE:
Press the
Reset
key to reset the settings selected in
Function Menu.
To Next Page
Loading...
