8
8-93
Default Setting (System Menu)
1
In the Sys. Menu/Count. menu, press the
or
key to
select [Printer].
2
Press the
OK
key. The Printer menu appears.
3
Press the
or
key to select [LF Action].
4
Press the
OK
key. LF Action appears.
5
Press the
or
key to select [LF Only], [LF and CR] or
[Ignore LF].
6
Press the
OK
key.
Completed.
is displayed and the
screen returns to the Printer menu.
CR Action
Set the character return action when the machine receives the character return code (character code 0DH). The table
below shows the available settings. The default setting is
CR Only
.
Use the procedure below to specify a CR action.
1
In the Sys. Menu/Count. menu, press the
or
key to
select [Printer].
Item Description
CR Only Only character return performed.
LF and CR Character return and line feed performed.
Ignore CR No character return performed.
To Next Page
Loading...
