8
8-155
Default Setting (System Menu)
6
Press the
OK
key. IPSec appears.
7
Press the
or
key to select [On] or [Off].
If you select [On] and press the
OK
key, Rule Setting
appears. Press the
or
key to select [On] or [Off].
8
Press the
OK
key.
Completed.
is displayed and the
screen returns to the Network Setting menu.
SSL Setting
This allows you to use SSL network security for communication. You can use SSL Setup to select whether or not SSL
is used and to specify the IPP port and HTTP port security settings.
SSL
Make this setting Make this setting when you use SSL. The default setting is
On
.
Use the procedure below to make the setting.
1
In the Sys. Menu/Count. menu, press the
or
key to
select [System/Network], and press the
OK
key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the
Right Select
key).
2
The System/Network menu appears.
3
Press the
or
key to select [Network Setting].
To Next Page
Loading...
