11
11-11
Management
3
In the delete confirmation screen, press [Yes] (the
Left
Select
key). The user is deleted and the screen returns
to Local User List.
Enabling/Disabling Group Authentication
This enables group authentication using the LDAP server. This menu can be used only when [Netwk Authentic.] is
selected as the user authentication method. For details of LDAP server settings, refer to the Operation Guide of the
LDAP server.
Use the procedure below to enable group authentication.
NOTE:
Refer to
Character Entry Method on Appendix-5
for details on entering characters.
1
Press the
System Menu/Counter
key on the main unit
operation panel.
2
Press the
or
key to select [User/Job Account].
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the
Right Select
key).
3
The User/Job Account menu appears.
4
Press the
or
key to select [User Login Set.].
5
Press the
OK
key. The User Login Set. menu appears.
6
Press the
or
key to select [Group Auth.].
To Next Page
Loading...
