4-16
Copying Functions
File Name Entry
Names a copy job. Add other information such as date and time or job number as necessary. You can check a job
history or job status using the job name, date and time, or job number specified here.
Use the procedure below to assign a name to your copy job.
1
Press the
Copy
key.
2
Place the original.
3
Press the
Function Menu
key. Function Menu appears.
4
Press the
or
key to select [File Name Entry].
5
Press the
OK
key. File Name Entry appears.
6
Enter the file name, press the
OK
key. Additional Info.
appears.
NOTE:
Refer to
Character Entry Method on Appendix-5
for
details on entering characters.
7
Enter the date, job number, etc. on the screen, and then
press the
OK
key.
NOTE:
Refer to
Character Entry Method on Appendix-5
for
details on entering characters.
Completed.
is displayed and the screen returns to the
basic screen for copying.
8
Press the
Start
key to start copying.
NOTE:
Press the
Reset
key to reset the settings selected in
Function Menu.
To Next Page
Loading...
