4-12
Copying Functions
9
Press the
or
key to select the desired border line
type and then press the
OK
key.
10
Press the
or
key to select the orientation of the
original and then press the
OK
key.
Completed.
is displayed and the screen returns to the
basic screen for copying.
11
Press the
Start
key. Scanning begins.
If the original is placed on the platen, replace the original
and press the
Start
key.
After scanning all originals, press [End Scan] (the
Right
Select
key) to start copying.
NOTE:
Press the
Reset
key to reset the settings selected in
Function Menu.
To Next Page
Loading...
