8-8
Default Setting (System Menu)
The table below lists the sizes that can be registered.
Use the procedure below to set a custom original size.
1
In the Sys. Menu/Count. menu, press the
or
key to
select [Common Settings].
2
Press the
OK
key. The Common Settings menu appears.
3
Press the
or
key to select [Orig./Paper Set.].
4
Press the
OK
key. The Orig./Paper Set. menu appears.
5
Press the
or
key to select [Custom Orig.Size].
6
Press the
OK
key. Size Entry(Y) appears.
7
Use the numeric keys to enter the paper length (Y).
8
Press the
OK
key. Size Entry(X) appears.
9
Use the numeric keys to enter the paper width (X).
10
Press the
OK
key.
Completed.
is displayed and the
screen returns to the Orig./Paper Set. menu.
Input units Dimensions
Inch models X: 1.97 to 14.02" (in 0.01" increments)
Y: 1.97 to 8.50" (in 0.01" increments)
Metric models X: 50 to 356 mm (in 1 mm increments)
Y: 50 to 216 mm (in 1 mm increments)
To Next Page
Loading...
