Kyocera ECOSYS M2030dn

8-20
Default Setting (System Menu)
Default Paper Source
Select the default paper source from Cassette 1-4 and Multi Purpose Tray.
NOTE: [Cassette 2] and [Cassette 3] are displayed when the optional paper feeder installed.
Use the procedure below to select the default paper source.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the  or  key to select [Orig./Paper Set.].
4 Press the OK key. The Orig./Paper Set. menu appears.
5 Press the  or  key to select [Def. PaperSource].
6 Press the OK key. Def. PaperSource appears.
7 Press the  or  key to select the paper source to be
used preferentially.
8 Press the OK key. Completed. is displayed and the
screen returns to the Common Settings menu.
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Orig./Paper Set.: a b
*********************
2 Def. Orig. Size
3 Custom PaperSize
[ Exit ]
1 Custom Orig.Size
Def. PaperSurce: a b
*********************
2 Cassette 2
3 Cassette 3
1 *Cassette 1