Kyocera ECOSYS M2030dn

8-42
Default Setting (System Menu)
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the
Right Select key).
4 The Timer Settings menu appears.
5 Press the  or  key to select [Panel Reset Timer].
6 Press the OK key. Panel Reset Timer appears.
7 Press the  or  key to set the Panel Reset Timer. Set
the amount of time before resetting the message display
on the panel in seconds. You cannot use the numeric
keys to enter this value.
8 Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
Login User Name: L b
*******************
Login Password:
[ Login ]
Timer Setting: a b
*********************
2 PanelReset Timer
3 Low Power Timer
[ Exit ]
1 Auto Panel Reset
PanelReset Timer: D b
(5 - 495)
******90* sec.