Kyocera ECOSYS M2030dn

8
8-49
Default Setting (System Menu)
4 Press the OK key. The Function Default menu appears.
5 Press the  or  key to select [Orig.Image(Send)].
6 Press the OK key. Orig.Image(Send) appears.
7 Press the  or  key to select [Text+Photo], [Photo],
[Text], [for OCR] or [Light Text/Line].
8 Press the OK key. Completed. is displayed and the
screen returns to the Function Default menu.
Zoom
Select the enlarged/reduced default when paper size/sending size changed after the originals set. The available
default settings are shown below.
Use the procedure below to select the default zoom setting.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the  or  key to select [Function Default].
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
Orig.Image(Send): a b
*********************
2 Photo
3 Text
1 *Text+Photo
Item Description
100% Copy (send/save) at actual size (100%).
Auto Automatically reduce or enlarge the
originals to match paper size/ sending size.
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language