Kyocera ECOSYS M2030dn

8
8-63
Default Setting (System Menu)
2 in 1 Layout
Select the default value for layout when [2 in 1] is selected for Combine. Items available for the default value are as
follows:
Use the procedure below to select the default value for layout.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the  or  key to select [Function Default].
4 Press the OK key. The Function Default menu appears.
5 Press the  or  key to select [Detail Setting].
6 Press the OK key. The Detail Setting menu appears.
7 Press the  or  key to select [2 in 1 Layout].
Item Description
g L to R f T to B Arranges from left to right or top to bottom.
e R to L Arranges from right to left.
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
Detail Setting: a b
*********************
2 4 in 1 Layout
3 Border Line
[ Exit ]
1 2 in 1 layout