Kyocera ECOSYS M2030dn

8-66
Default Setting (System Menu)
3 Press the  or  key to select [Function Default].
4 Press the OK key. The Function Default menu appears.
5 Press the  or  key to select [Detail Setting].
6 Press the OK key. The Detail Setting menu appears.
7 Press the  or  key to select [Border Line].
8 Press the OK key. Border Line appears.
9 Press the  or  key to select [ None], [ l Solid Line],
[
m Dotted Line] or [ n Positioning Mark].
10 Press the OK key. Completed. is displayed and the
screen returns to the Detail Setting menu.
Orig. Binding
Select the default value for the binding edge of the original when [2-sided>>1-sided] or [2-sided>>2-sided] is selected
for Duplex. Items available for the default value are as follows:
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
Detail Setting: a b
*********************
2 4 in 1 Layout
3 Border Line
[ Exit ]
1 2 in 1 layout
Border Line: a b
*********************
2 l Solid Line
3 m Dotted Line
1 * None
Item Description
o Left/Right Left/right binding
p Top Top binding