Kyocera ECOSYS M2030dn

8
8-83
Default Setting (System Menu)
5 Press the  or  key to select [Left] or [Right].
6 Press the OK key. This displays the function selection
screen for the flexible key selected in step 5. The screen
shown is the one when [Left] is selected.
7 Press the  or  key to select the function you want to
register to the flexible key.
8 Press the OK key. Completed. is displayed and the
screen returns to the Copy menu.
IMPORTANT: If you try to set the function that is registered
to the other flexible key, you cannot set it and
This function is
already registered. is displayed.
Left: a b
4 Duplex
*********************
6 Combine
5 *Zoom
This function is
already registered.