Kyocera ECOSYS M2030dn

8
8-85
Default Setting (System Menu)
Use the procedure below to select the emulation.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the  or  key to select [Emulation Set.].
4 Press the OK key. Emulation Set. appears.
5 Press the  or  key to select the printer you want to
emulate.
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
NOTE: If you select [KPDL] or [KPDL(Auto)], the operation
after selecting the emulation is different from others.
If you select [KPDL], refer to
page 8-86 .
If you select [KPDL(Auto)], refer to page 8-86 .
Sys. Menu/Count.: a b
5 Common Settings
6 CoPy
*********************
[ Exit ]
7 Printer
Printer: a b
*********************
2 EcoPrint
3 Override A4/LTR
[ Exit ]
1 Emulation Set.
Emulation Set.: a b
5 PCL6
6 KPDL
*********************
7 *KPDL(Auto)