Kyocera ECOSYS M2030dn

8-108
Default Setting (System Menu)
Job Retention Deletion
The procedure for setting Job Retention Deletion is explained below.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Document Box].
2 Press the OK key. The Document Box menu appears.
3 Press the  or  key to select [Job Box].
4 Press the OK key. The Job Box screen appears.
5 Press the  or  key to select [JobRet. Deletion].
6 Press the OK key. The Job Retention Deletion screen
appears.
7 Press the  or  key to select the period that jobs are
retained.
8 Press the OK key. The screen returns to the Job Box
screen.
Sys. Menu/Count.: a b
8 Send
9 FAX
*********************
[ Exit ]
: Document Box
Document Box: a b
*********************
2 Job Box
3 Select Key Set.
[ Exit ]
1 Sub Address Box
Job Box: a b
*********************
2 JobRet. Deletion
[ Exit ]
1 Quick Copy Jobs
JobRet. Deletion: a b
*********************
2 1 hour
3 4 hours
1 *Off