Kyocera ECOSYS M2030dn

8
8-115
Default Setting (System Menu)
2 Press the OK key. The Report menu appears.
3 Press the  or  key to select [Result Rpt Set.].
4 Press the OK key. The Result Rpt Set. menu appears.
5 Press the  or  key to select [Send Result]. The Send
Result menu appears.
6 Press the  or  key to select [E-mail/Folder], [FAX],
[CancelBeforeSend] or [Dest. Info.]. Selected menu
appears.
NOTE: Selecting [CancelBeforeSend] can be specified
whether the machine prints the report when canceling the
operation before sending.
When selecting [Off] in both E-mail/Folder and FAX menu,
[CancelBeforeSend] is not displayed.
7 Press the  or  key to select [Off], [On] or [Error Only].
When selecting [CancelBeforeSend], press the
 or 
key to select [Off] or [On].
If you selected [Dest. Info.], select [Dest. or Name] or
[Dest. and Name].
8 Press the OK key. A Result Report is sent. Completed.
is displayed and the screen returns to the Send Result
menu.
Report: a b
*********************
2 Admin Rpt Set.
3 Result Rpt Set.
[ Exit ]
1 Report Print
Result Rpt Set.: a b
*********************
2 FAX RX Result
3 JobFinish Notice
[ Exit ]
1 Send Result
Send Result: a b
*********************
2 FAX
3 CancelBeforeSend
[ Exit ]
1 E-mail/Folder
E-mail/Folder: a b
1 Off
2 On
*********************
3 *Error Only