8
8-149
Default Setting (System Menu)
WSD Scan Setup
Select whether or not to use WSD Scan. The default setting is
On
.
Use the procedure below to setup the WSD-SCAN setting. The machine must be restarted after the setting is
changed.
1
In the Sys. Menu/Count. menu, press the
or
key to
select [System/Network], and press the
OK
key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the
Right Select
key).
2
The System/Network menu appears.
3
Press the
or
key to select [Network Setting].
4
Press the
OK
key. The Network Setting menu appears.
5
Press the
or
key to select [WSD-SCAN].
6
Press the
OK
key. The WSD-SCAN menu appears.
7
Press the
or
key to select [On] or [Off].
8
Press the
OK
key.
Completed.
is displayed and the
screen returns to the Network Settings menu.
To Next Page
Loading...
