Kyocera ECOSYS M2030dn

8
8-161
Default Setting (System Menu)
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the
Right Select key).
2 The System/Network menu appears.
3 Press the  or  key to select [Network Setting].
4 Press the OK key. The Network Setting menu appears.
5 Press the  or  key to select [Secure Protocol].
6 Press the OK key. Secure Protocol appears.
7 Press the  or  key to select [SMTP Security].
8 Press the OK key. SMTP Security appears.
9 Press the  or  key to select [Off], [SSL] or
[STARTTLS].
10 Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
Login User Name: L b
*******************
Login Password:
[ Login ]
System/Network: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
Network Setting: a b
*********************
6 Host Name
7 LAN Interface
[ Exit ]
5 Secure Protocol
Secure Protocol: a b
3 HTTP Security
4 LDAP Security
*********************
[ Exit ]
5 SMTP Security
SMTP Security: a b
*********************
2 SSL
3 STARTTLS
1 *Off