Kyocera ECOSYS M2030dn

8-166
Default Setting (System Menu)
TCP/IP
This specified whether TCP/IP is used.
The method for setting is the same as for the standard Network settings. For details, refer to
TCP/IP (IPv4) Setup on
page 8-137.
IPv4 Setting
This selects the settings for TCP/IP (IPv4). The method for setting is the same as for the standard Network settings.
For details, refer to
TCP/IP (IPv4) Setup on page 8-137.
IPv6 Setting
This selects the settings for TCP/IP (IPv6). The method for setting is the same as for the standard Network settings.
For details, refer to
TCP/IP (IPv6) Setup on page 8-146.
Bonjour Settings
Select whether or not to use Bonjour. The default setting is Off .
Use the procedure below to specify the Bonjour setting.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the
OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the
Right Select key).
2 The System/Network menu appears.
3 Press the  or  key to select [Optional Network].
4 Press the OK key. The Optional Network screen
appears.
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]
System/Network: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
Optional Network: a b
1 Basic
[ Exit ]