Kyocera ECOSYS M2030dn

8
8-169
Default Setting (System Menu)
LAN Interface
Specify the settings for the LAN interface to be used. The default setting is Auto .
Use the procedure below to select the interface.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the
OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the
Right Select key).
2 The System/Network menu appears.
3 Press the  or  key to select [Optional Network].
4 Press the OK key. The Optional Network screen
appears.
5 Press the  or  key to select [Basic].
6 Press the OK key. The Basic menu screen appears.
7 Press the  or  key to select [LAN Interface].
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]
System/Network: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
Optional Network: a b
1 Basic
[ Exit ]
Basic: a b
*********************
2 TCP/IP Settings
3 Bonjour
[ Exit ]
1 Host Name