Kyocera ECOSYS M2030dn

2
Preparation before Use
2-15
NOTE: When the network settings have been changed, restart the network card of the device. This is mandatory to
make the settings effective. For details, refer to Restart Network on page 8-170.
HTTPS On/Off
LDAP On/Off
WSD-SCAN On/Off
WSD-PRINT On/Off
IPSec IPSec On/Off
Rule Setting On/Off
Secure
Protocol
SSL On/Off
IPP Security IPP/IPP over SSL
IPPoverSSL only
HTTP Security HTTP/HTTPS
HTTPS only
LDAP Security Off
SSL/TLS
STARTTLS
SMTP Security Off
SSL/TLS
STARTTLS
POP3 Security 1 (2, 3) Off
SSL/TLS
STARTTLS
LAN Interface Auto
10Base-Half
10Base-Full
100Base-Half
100Base-Full
1000Base-T