Kyocera FS-1800 - Removing the Pickup Roller and Feed Roller

FS-1800/1800N | FS-3800/3800N
5-13
5-2-6 Removing the pickup roller and feed roller
1. Remove the paper feed unit. See page 5-6.
2. Turn the paper feed unit 1 over.
3. Detach the release holder 2 by sliding it while pressing the projections A.
4. Remove the feed roller assembly 3 while pressing it in the direction of arrow B.
Figure 5-2-10 Removing the feed roller assembly
A
B
A
3
1
2