Kyocera FS-1800 - Page 250

B-6
FS-1800/1800N | FS-3800/3800N
Example Meaning Description
8 /S00
9 /F00
0 /N00
! /D10:DM0301.DAN
@ /RS2
# /DK-60
$ /6C
% /01
^ /[0003-0003]
& /BF-AD
* /AF.H
Serial interface error
Operator panel lock (Shown only
during locking)
NVRAM error (Shown only if
error has occurred)
NVRAM down loading status
Serial interface mode
Drum unit model code
Drum sensitivity
Calibration table settings
Option unit equipment
Threshold level for “MK replace/
warning” message display
Average print coverage (total)
00= Normal, bit 0= Framing error
bit 1= Overrun, bit 2= Parity error
01= Partially locked
02= Fully locked
01= ID error, 02= Version error,
03= Checksum error,
04= NVRAM crash error
00= Normal (Nothing
downloaded), bit0= Font data,
bit1= host data, bit2= Macro data,
bit3= Program data, bit4=
Operator panel message
download (shown file name),
bit5= OEM data, bit6= Reserved,
bit7= Error occurred
RS2= RS-232C
(Shown only set the data at
EEPROM on the drum board.)
-
Hexa decimal (FRPO I4)
The first 2 byte:
bit0= MP tray, bit1 to 6= Paper
feeder (5 and 6 are not
supported.), bit7= Duplexer, bit8=
Bulk paper feeder, bit9= Envelope
feeder, bit10 to 15= Reserved.
The second 2 byte:
bit0 =Face-up output tray, bit1=
Face-down output tray, bit2= Bulk
paper stacker. bit3= Sorter, bit4 to
15= Reserved.
(Shown only with MICR model)
Two digits for integer part; one
digit for decimal; unit is in percent