2FT
1-3-45
1-3-12 Installing the hard disk (option)
<Procedure>
1. Remove the two screws of the slot for OPT2
which is on the machine right back, and then
remove the cover.
2. Insert the hard disk in the socket on the
printer board PCB.
3. Refit the cover which is removed with step
1.
4. Turn the power switch on and initialize the
hard disk at the printer menu.
5. Output the printer status report and confirm
whether the hard disk is recognized.
Figure 1-3-90
Hard disk
Socket
To Next Page
Loading...
