Kyocera KM-4230

3-1-1
2A3/4
3-1-1 Unpacking and installation
( 1 ) Installation environment
1. Temperature: 10 - 35°C/50 - 95°F
2. Humidity: 15 - 18%RH
3. Power supply: 120 V AC, 10 A
220 - 240 V AC, 4.8 A
4. Power source frequency: 50 Hz ±0.3%/60 Hz ±0.3%
5. Installation location
• Avoid direct sunlight or bright lighting. Ensure that the photoconductor will not be
exposed to direct sunlight or other strong light when removing paper jams.
• Avoid extremes of temperature and humidity, abrupt ambient temperature
changes, and hot or cold air directed onto the machine.
• Avoid dust and vibration.
• Choose a surface capable of supporting the weight of the machine.
• Place the machine on a level surface (maximum allowance inclination: 1° ).
• Avoid air-borne substances that may adversely affect the machine or degrade the
photoconductor, such as mercury, acidic or alkaline vapors, inorganic gasses,
NOx, SOx gases and chlorine-based organic solvents.
• Select a room with good ventilation.
6. Allow sufficient access for proper operation and maintenance of the machine.
Machine front: 1000 mm/39
3
/
8
" Machine rear: 100 mm/4"
Machine right: 700 mm/27
5
/
8
" Machine left: 600 mm/23
5
/
8
"
h
d
g
f
e
i
c
b
a
Figure 3-1-1 Installation dimensions
a: 811 mm/31
15
/
16
" d: 1279 mm/50
3
/
8
" g: 455 mm/17
15
/
16
"
b: 1131 mm/44
1
/
2
" e: 748 mm/29
7
/
16
" h: 1827 mm/71
15
/
16
"
c: 627 mm/24
11
/
16
" f: 1506 mm/59
5
/
16
" i: 35 mm/1
3
/
8
"