3-1-41
2A3/4
3-1-7 Installing the key counter (option)
Key counter installation requires the following parts:
Key counter set (P/N 66069781)
Contents of the set:
• Key counter cover (P/N 66060010)
• Key counter retainer (P/N 66060030)
• Key counter cover retainer (P/N 66060021)
• Key counter mount (P/N 66060040)
• Key counter assembly (P/N 29236240)
• Four (4) M4 × 6 bronze TP-A screws (P/N B4304060)
• Two (2) M4 × 10 bronze TP-A screws (P/N B4304100)
• One (1) M4 × 6 chrome TP-A screw (P/N B4104060)
• Two (2) M3 × 6 bronze flat-head screws (P/N B2303060)
• One (1) M3 bronze nut (P/N C2303000)
<Procedure>
1. Fit the key counter assembly to the key counter retainer using the two screws and
nut.
2. Fit the key counter mount to the key counter cover using the two screws, and attach
the key counter retainer to the mount using the two screws.
M3
×
6 flat-head screws (B2303060)
M4
×
6 screws
(B4304060)
M3 nut (C2303000)
Key counter retainer (66060030)
Key counter mount (66060040)
Key counter cover (66060010)
M4
×
6 screws (B4304060)
Key counter assembly (29236240)
Figure 3-1-50
To Next Page
Loading...
