3-1-7
2A3/4
1. Remove the two tapes holding the front cover.
2. Remove the two tapes holding the duplex unit.
3. Remove the two tapes holding the drawers.
4. Remove the two tapes holding the right cover.
5. Open the front cover and remove the three tapes holding the SRDF.
6. Remove the two tapes holding the power cord.*
7. Remove the tape binding the power cord.
Power cord*
SRDF
Front cover
Duplex unit
Drawers
Right cover
Figure 3-1-4
* For 120 V specifications only.
Remove the tapes. (42 ppm)
To Next Page
Loading...
