Kyocera KM-4230 - Page 18

2A3/4
1-1-4
Copier (52 ppm copier)
Type …………………………… Console
Copying system ……………… Dry, indirect electrostatic system
Originals ……………………… Sheets and books
Maximum size: A3/11" × 17"
Original feed system ………… Fixed
Copy paper ……………………Drawer and duplex unit: Plain paper (64 – 80 g/m
2
)
Bypass table: Plain paper (60 – 160 g/m
2
)
Special paper: Transparencies, tracing paper, colored
paper, letterhead and envelopes (only when used as a
printer)
Note: Use the bypass table for special paper.
Copying sizes ………………… Maximum: A3/11" × 17"
Minimum: A6R/5
1
/
2
" × 8
1
/
2
"
During duplex copying
Maximum: A3/11" × 17"
Minimum: A5R/5
1
/
2
" × 8
1
/
2
"
Magnification ratios …………… Manual mode: 25 – 400%, 1% increments
Auto copy mode: Fixed ratios
Metric
1:1 ± 0.1%, 1:4.00/1:2.00/1:1.41/1:1.06/1:0.75/
1:0.70/1:0.50/1:0.25
Inch
1:1 ± 0.1%, 1:4.00/1:2.00/1:1.29/1:1.21/1:0.78/
1:0.64/1:0.50/1:0.25
Copy speed …………………… At 100% magnification in memory copy mode:
A4/11" × 8
1
/
2
": 52 copies/min.
A4R/8
1
/
2
" × 11": 35 copies/min.
A3/11" × 17": 26 copies/min.
B5 : 52 copies/min.
B5R : 42 copies/min.
B4 (257 × 364)/8
1
/
2
" × 14": 31 copies/min.
When the SRDF is used (at 100% magnification):
A4/11" × 8
1
/
2
": 52 copies/min.
First copy time …………………4.5 s or less (A4/11" × 8
1
/
2
", 100% magnification,
upper drawer, manual copy density control)
Warm-up time …………………180 s or less (room temperature 20˚C/68˚F, 65%RH)
Paper feed system …………… Automatic feed
Capacity:
Drawers: 550 sheets
Manual feed
Capacity:
Bypass: 100 sheets
Photoconductor ……………… OPC (drum diameter 60 mm)
Charging system ………………Single positive corona charging, 670 – 730 µA
Exposure light source ………… Semiconductor laser
Exposure scanning system … Polygon mirror
Developing system …………… Dry, reverse developing (magnetic brush)
Developer: 2-component, ferrite carrier and N29T black
toner