3-2-10
2A3/4
Description
Maintenance
item No.
U003 Setting the service telephone number
Description
Sets the telephone number to be displayed when a service call code is
detected.
Purpose
To set the telephone number to call service when installing the machine.
Method
Press the print key. The currently set telephone number is displayed.
Setting
1 Enter a telephone number (up to 15 digit) using the numeric keys.
To enter symbols such as hyphens and parentheses, select as required
from the symbols displayed on the touch panel as shown below. To
move the cursor, press either of the arrows in the bottom row.
2 Press the print key. The phone number is set, and the screen for
selecting a maintenance item No. is displayed.
Completion
To exit the maintenance mode without changing the current setting, press
the stop/clear key. The screen for selecting a maintenance item No. is
displayed.
*
(
—
←
#
)
(Space)
→
To Next Page
Loading...
