3-2-12
2A3/4
Description
Maintenance
item No.
U005 Copying without paper
Description
Simulates the copy operation without paper feed.
Purpose
To check the overall operation of the machine.
Method
1 Press the print key. The screen for selecting an item is displayed.
2 Select the item to be operated. The selected item is displayed in
reverse.
3 Press the interrupt key. The copy mode screen is displayed.
4 Set the operation conditions required on the copy mode screen.
Changes in the following settings can be made.
• Paper feed locations
• Magnifications
• Simplex or duplex copy modes
• Number of copies: in simplex copy mode, continuous copying is
performed when set to 999; in duplex copy mode, continuous copying
is performed regardless of the setting.
• Copy density
• Keys on the operation panel other than the energy saver key
5 To control the paper feed pulley, remove all the paper in the drawers,
or the drawers. With the paper present, the paper feed pulley does not
operate.
6 Press the print key. The operation starts.
Copy operation is simulated without paper under the set conditions.
When operation is complete, the screen for selecting an item is
displayed.
7 To stop continuous operation, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for
selecting a maintenance item No. is displayed.
Display Operation
PPC
PPC + DF
Only the copier operates.
Both the copier and SRDF operate
(continuous operation).
To Next Page
Loading...
