Kyocera KM-4230 - Page 229

3-2-20
2A3/4
U035 Setting folio size
Description
Changes the image area for copying onto folio size paper.
Purpose
To prevent the image at the trailing edge, or right or left side of the paper
from not being copied by setting the actual size of the folio paper used.
Method
Press the print key. The screen for selecting an item is displayed.
Setting
1 Select the item to be set. The selected item is displayed in reverse, and
the current setting is displayed in the adjustment window.
2 Change the setting using the Up/Down keys.
3 Press the print key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No.
is displayed.
U036 Setting envelope size
Description
Changes the image area for printing onto an envelope when the optional
printer unit is installed.
Purpose
To prevent the image at the trailing edge, or right or left side of the paper
from not being printed by setting the actual size of the envelop used.
Method
Press the print key. The screen for selecting an item is displayed.
Setting
1 Select the item to be set. The selected item is displayed in reverse, and
the current setting is displayed in the adjustment window.
2 Change the setting using the Up/Down keys.
3 Press the print key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No.
is displayed.
Display
LENGTH DATA
WIDTH DATA
Setting
Length
Width
Setting range
330 to 356 mm
220 to 220 mm
Initial setting
330
210
Display
LENGTH DATA
WIDTH DATA
Setting
Length
Width
Setting range
162 to 242 mm
98 to 162 mm
Initial setting
242
162
Maintenance
item No.
Description