3-2-52
2A3/4
Description
Maintenance
item No.
U162 Stabilizing fixing forcibly
Description
Stops the stabilization fixing drive forcibly, regardless of fixing temperature.
Purpose
To forcibly stabilize the machine before the fixing section reaches
stabilization temperature.
Method
1 Press the print key. The screen for executing is displayed.
2 Press the print key. The forced stabilization mode is entered, and
stabilization operation stops. The screen for selecting a maintenance
item No. is displayed.
To exit the forced stabilization mode, turn the power off and on.
Completion
To exit this maintenance item without executing forced fixing stabilization,
press the stop clear key.
U196 Turning the fixing heater on
Description
Turns the fixing heater on.
Purpose
To check fixing heaters M or S.
Method
1 Press the print key. The screen for selecting an item is displayed.
2 Select the heater to be turned on. The selected heater turns on for 3 s
and then turns off.
Completion
Press the stop/clear key when fixing motors M and S are off. The screen
for selecting the maintenance item No. is displayed.
Display
MAIN
SUB
Description
Fixing heater M (H1)
Fixing heater S (H2)
To Next Page
Loading...
