Kyocera KM-4230 - Page 288

3-2-79
2A3/4
Maintenance
item No.
Description
U263 Setting DF copy ejection orientation
Description
Sets the copy paper ejection orientation in DF copying.
Purpose
To set face up ejection to eject the same order as the originals when using
special papers such as tracing paper and film as copy medium.
Method
Press the print key. The screen for selecting an item is displayed.
Setting
1 Select an ejection orientation.
Initial setting: Face down
2 Press the print key. The setting is set , and the screen for entering a
maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press
the stop/clear key. The screen for selecting a maintenance item is
displayed.
Display
FACE-DOWN (NORMAL)
FACE-UP (SPEED)
FACE-UP (MEMORY)
Description
Face down ejection.
Face up ejection with bitmap copy.
Face up ejection with memory copy.