3-2-81
2A3/4
Maintenance
item No.
Description
U330 Sets the number of copies for switching the copy eject tray in the
finisher (F-4130)
Description
Sets the number of copies at which the copy eject tray will switch from the
sub tray to the main tray.
Purpose
Selects the value according to user request.
Method
Press the print key. The screen for adjustment is displayed.
Setting
1 Use the numeric keys or Up/Down keys to adjust the preset value.
The copy eject tray is switched from the sub tray to the main tray when
the number of copies ejected to the sub tray exceeds the preset value.
2 Press the print key. The setting is set , and the screen for entering a
maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press
the stop/clear key. The screen for selecting a maintenance item is
displayed.
Description
Number of copies to be ejected on
the sub tray
Setting range
1 to 100 (sheets)
Initial value
100
To Next Page
Loading...
