3-2-83
2A3/4
Maintenance
item No.
Description
U334 Setting the ejection method in the booklet stitcher (F-4220)
Description
Sets whether or not the eject bin in use is switched to the other bin when
the bin in use in the booklet stitcher overflows.
Purpose
Sets the value to 1 BIN to use one bin only for copying and the other bin
only for printing.
Method
Press the print key. The screen for selecting an item is displayed.
Setting
1 Select an ejection method.
Initial setting: 1 BIN
2 Press the print key. The setting is set , and the screen for entering a
maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press
the stop/clear key. The screen for selecting a maintenance item is
displayed.
Display
2 BIN
1 BIN
Description
The eject bin is switched when a bin overflows.
The eject bin is not switched even when a bin overflows.
To Next Page
Loading...
