2A3/4
3-6-16
Check procedures/corrective measures
Adjust the installation position of the center
adjuster (see page 3-3-105).
Causes
1. Center adjuster installed incor-
rectly.
(23) When the duplex unit
is used, the center of
the original image
and that of the copy
image do not align.
Causes
1. Side registration section installed incorrectly.
1. Side registration sec-tion installed
incor-rectly.
Adjust the installation position of the side
registration section (see page 3-3-87).
Causes
Check procedures/corrective measures
(24) When the large paper
deck is used, the
center of the original
image and that of the
copy image do not
align.
Causes
1. Center adjuster installed incorrectly.
To Next Page
Loading...
