2FB/2FC
1-5-9
Optional
document
finisher
93 Jam in saddle tray section When the inside tray detection sensor (ITDS) does not turn on
within 5000 ms of the centerfold unit paper entry sensor
(CUPES) turning on.
94 Jam in saddle eject sec-
tion
The folded edge detection sensor (FEDS) is not turned on
even if 5000 ms elapse after centerfold operation starts.
95 Jam in saddle eject sec-
tion
When the folded edge detection sensor (FEDS) does not turn
off within 6000 ms of its turning on.
Section Jam code Description Conditions
To Next Page
Loading...
