Kyocera KM-8030

2FB/2FC-2.0
1-4-76
1-4-2 Copier management
In addition to a maintenance function for service, the copier is equipped with a management function which can be oper-
ated by users (mainly by the copier administrator). In this copier management mode, settings such as default settings can
be changed.
(1) Using the copier management mode
Press [Job Accounting].
Enter the
management code.
Enter the
management code.
Enter the
management code.
Enter the
management code.
Enter the
management code.
Enter the
management code.
Enter the
management code.
Press the System Menu/Counter key.
Manage accounting the copy count
(page 1-4-77).
Press [Copy Default].
Press [Machine Default].
Start
Make copy default settings
(page 1-4-78).
Make machine default settings
(page 1-4-80).
Press [Print Report].
Output the report (page 1-4-83).
Make MP tray settings
(page 1-4-82).
Press [MP tray Setting].
Execute original size
registration (page 1-4-83).
Press [Register Orig. Size].
Check and output the total copy count
(page 1-4-84).
Press [Counter Check].
Refresh the drum (page 1-4-84).
Press [User adjustment].
End
Press [Close].
Press [Language].
Set the language (page 1-4-84).
Press [Weekly timer] ([Week timer]).
Make weekly timer settings
(page 1-4-82).
Press [Document Management].
Make document management
default settings (page 1-4-83).
Press [BOX Management] ([Hard Disk Management]).
Execute hard disk management
items (page 1-4-83).