Kyocera KM-8030

2FB/2FC
1-2-1
1-2Handli ng Precautions
1-2-1 Drum
Note the following when handling or storing the drum.
• When removing the drum, never expose the drum surface to strong direct light.
• Keep the drum at an ambient temperature between -20
°C/-4 °F and 40 °C/104 °F and at a relative humidity not
higher than 90% RH.
Avoid abrupt changes in temperature and humidity.
• Avoid exposure to any substance which is harmful to or may affect the quality of the drum.
• Do not touch the drum surface with any object. Should it be touched by hands or stained with oil, clean it.
1-2-2 Toner container
• Store the toner container in a cool, dark place.
• Avoid direct light and high humidity.
1-2-3 Installation environment
1. Temperature: 10 - 32.5 °C/50 - 90.5 °F
2. Humidity: 15 - 80%RH
3. Power supply: 120 V AC, 16.0 A
220 - 240 V AC, 9.5 A
4. Power source frequency: 50 Hz
±2%/60 Hz ±2%
5. Installation location
• Avoid direct sunlight or bright lighting. Ensure that the photo-conductor will not be exposed to direct sunlight or other
strong light when removing paper jams.
• Avoid extremes of temperature and humidity, abrupt ambient temperature changes, and hot or cold air directed onto
the machine.
• Avoid dust and vibration.
• Choose a surface capable of supporting the weight of the machine.
• Place the machine on a level surface (maximum allowance inclination: 1°).
• Avoid air-borne substances that may adversely affect the machine or degrade the photo-conductor, such as mercury,
acidic of alkaline vapors, inorganic gasses, NOx, SOx gases and chlorine-based organic solvents.
• Select a room with good ventilation.
6. Allow sufficient access for proper operation and maintenance of the machine.
Machine front: 1000 mm/39
3/8" Machine rear: 100 mm/3 15/16"
Machine right: 700 mm/27
9/16" Machine left: 600 mm/23 5/8"