Kyocera KM-8030

2FB/2FC-2.0
1-6-4
Detaching the paper feed pulley and forwarding pulley of cassette 1
6. Remove connector, band and two stop
rings, and then open the primary paper feed
unit of cassette 1.
Figure 1-6-3
7. Remove two stop rings and then remove
the primary paper feed of cassette 1 from
the deck conveying unit.
Figure 1-6-4
8. Remove the stop ring and slide the joint in
the direction of the arrow.
9. Open the primary paper feed of cassette 1.
Figure 1-6-5
Primary paper feed unit
of cassette 1
Stop ring
Connector
Band
Stop ring
Stop ring
Stop ring
Primary paper
feed unit cover
Primary paper feed unit
of cassette 1
Primary paper feed unit
of cassette 1
Stop ring
Joint