2FB/2FC-4
1-6-44
11. Replace the laser scanner unit and attach
the unit.
* When attaching the laser scanner unit,
check that two projections of the unit are
inserted to the holes of inside the machine.
Figure 1-6-88
12. Refit the laser scanner unit using four
screws and connect the two connectors.
13. Insert three claws of upper left frame to the
inserted parts of inside the machine.
Refit the upper left frame.
Figure 1-6-89
14. Refit three bands of black wire.
15. Refit the operation unit upper cover, opera-
tion unit right cover, operation unit left cover,
staple tray, middle right cover and left cover.
16. Refit the left upper cover, contact glass and
right upper cover.
17. Refit the hinge retainer.
Laser scanner unit
Projection
Projection
Hole
Hole
Upper left frame
Inserted parts
Claws
Claw
To Next Page
Loading...
