2FB/2FC-3
2-4-2
8
Adjusting the trailing
edge margin (printing
adjustment)
LSU illumination end timing U402 TRAIL U402 test
pattern
1-6-28 To make an adjustment for
duplex copying, select TRAIL
(DUP).
9
Adjusting the left and
right margins (printing
adjustment)
LSU illumination start/end timing U402 A/C U402 test
pattern
1-6-28
10
Adjusting the lateral
squareness (scanning
adjustment)
Adjusting the position of the ISU
(scanning adjustment)
Test chart 1-6-50
11
Adjusting magnification
of the scanner in the
main scanning direction
(scanning adjustment)
Data processing U065
U070
MAIN SCAN
ADJ
CIS MAIN ADJ
Test chart 1-6-51 U065: For copying an original
placed on the contact glass.
U070: For copying originals from
the document processor (to make
an adjustment for CIS).
12
Adjusting magnification
of the scanner in the
auxiliary scanning direc-
tion (scanning adjust-
ment)
Original scanning speed U065
U070
SUB SCAN ADJ
CONVEY
SPEED
Test chart 1-6-52
1-6-91
U065: For copying an original
placed on the contact glass.
U070: For copying originals from
the document processor.
To make an adjustment for CIS,
select CIS SUB ADJ.
13
Adjusting the center line
(scanning adjustment)
Adjusting the original scan data
(image adjustment)
U067
U072
ADJUST DATA
ADJUST DATA
Test chart 1-6-53
1-6-92
U067: For copying an original
placed on the contact glass.
U072: For copying originals from
the document processor.
To make an adjustment for CIS,
select ADJUST DATA2.
To make an adjustment for rotate
copying, select ADJUST DATA3.
Adjus
ting
order
Item Image Description
Maintenance mode
Original Page Remarks
Item No.
Mode
To Next Page
Loading...
