Copier Functions
1-2
Paper Source Selection
Perform the following procedure to select a paper source (cassette or multi purpose tray) with the
desired paper size.
1
Set the original.
If Auto is displayed on the message display, copy
paper of the same size as the original is automatically
selected.
2
To change the paper size, press the Paper Select key
to select the desired paper source.
Notes • When using the multi purpose tray, set the paper size and the paper type referring to Multi
Purpose Tray Settings on page 3-26.
• You can set the machine to display the MP Tray Paper size screen when the multi purpose
tray is selected. (See Multi Purpose Tray Confirmation Display on page 3-14.)
3
Press the Start key. Copying starts.
Auto
1
100%
Ready to copy .
Auto
To Next Page
Loading...
